Welcome to Rajdeep Metals
Maulana Azad Road, Mumbai-400004
Product 08 / 08

Industrial Wire

Stainless steel, spring, cold heading, welding filler, nickel alloy, copper and brass wire from 0.10 mm to 12 mm — in coils, spools and straight cut lengths.

Coils, Spools & Rods Stainless steel and nickel alloy wire coils and spools supplied by Rajdeep Metals
Product Overview

Wire Drawn to the Size, Temper and Finish You Need

Rajdeep Metals supplies ferrous and non-ferrous wire for springs, fasteners, welding, mesh, electrical and general engineering use. The right wire depends on more than grade — diameter tolerance, temper, surface finish and coil or spool format all affect how it performs on your machine.

From soft annealed stainless wire for weaving and binding, to spring-temper wire for coiling and AWS-classified filler wire for TIG and MIG welding, we match each order to its end use and supply it with mill test certificates.

  • Diameter 0.10 mm to 12 mm
  • Coils, spools & cut lengths
  • Annealed to spring temper
  • Bright & matt finishes
  • AWS filler wire classes
  • EN 10204 3.1 MTC

Types of Wire

Wire products we supply
Stainless Steel Wire – 3D drawing
Stainless Steel Wire
Spring Wire – 3D drawing
Spring Wire
ER308L Filler Wire – 3D drawing
ER308L Filler Wire
ER316L Filler Wire – 3D drawing
ER316L Filler Wire
ER2209 Duplex Filler Wire – 3D drawing
ER2209 Duplex Filler Wire
ERNiCrMo-3 Filler Wire – 3D drawing
ERNiCrMo-3 Filler Wire
Cold Heading Wire – 3D drawing
Cold Heading Wire
Wire Rods – 3D drawing
Wire Rods
Copper Wire – 3D drawing
Copper Wire
Brass Wire – 3D drawing
Brass Wire
Nickel Alloy Wire – 3D drawing
Nickel Alloy Wire
Wire Mesh – 3D drawing
Wire Mesh

Specifications

Standards, size range and supply conditions
Stainless Steel WireASTM A580 / ASME SA580, ASTM A555 (general requirements), ASTM A492 (rope wire)
Spring WireASTM A313 (stainless steel spring wire)
Cold Heading WireASTM A493 (stainless steel wire for cold heading and cold forging)
Nickel Alloy WireASTM B166 (Inconel 600), ASTM B164 (Monel 400 / R-405)
Welding Filler WireAWS A5.9 (stainless steel — ER308L, ER316L, ER2209), AWS A5.14 (nickel alloy — ERNiCrMo-3, ERNiCu-7)
Copper WireASTM B1 (hard-drawn), ASTM B2 (medium-hard-drawn), ASTM B3 (soft / annealed)
Brass WireASTM B134
Diameter Range0.10 mm to 12 mm (SWG / AWG and metric sizes)
FormsCoils, Spools, Straight Cut Lengths, Wire Rods
Condition / TemperSoft, Annealed, Bright, Half-Hard, Spring Temper
SurfaceBright, Matt, Soap-Coated, Pickled
TestingTensile, Diameter & Ovality, Wrap / Coil Test, Torsion (spring wire), PMI

Grades Available

Common wire grades and filler classifications

Stainless Steel

302304304L 316316L310S 32143017-7 PH

Welding Filler Wire

ER308LER309LER316L ER347ER2209ER2594 ERNiCrMo-3ERNiCu-7

Nickel Alloys

Nickel 200Monel 400 Inconel 600Inconel 625 Hastelloy C276

Copper & Brass

ETP Copper (C11000)Brass C26000 Brass C27000Phosphor Bronze

Chemical Composition

Weight % — maximum unless a range is shown (ASTM A580 / AWS A5.9)
GradeCMnSiPSCrNiMo
3020.152.000.750.0450.03017.0 – 19.08.0 – 10.0—
3040.082.001.000.0450.03018.0 – 20.08.0 – 10.5—
304L0.0302.001.000.0450.03018.0 – 20.08.0 – 12.0—
3160.082.001.000.0450.03016.0 – 18.010.0 – 14.02.00 – 3.00
316L0.0302.001.000.0450.03016.0 – 18.010.0 – 14.02.00 – 3.00
ER308L0.031.0 – 2.50.30 – 0.650.030.0319.5 – 22.09.0 – 11.00.75
ER316L0.031.0 – 2.50.30 – 0.650.030.0318.0 – 20.011.0 – 14.02.0 – 3.0

Filler wire chemistry per AWS A5.9; Cu is limited to 0.75% max for ER308L / ER316L. Nickel alloy, copper and brass wire chemistry follows the respective ASTM / AWS specification.

Mechanical Properties

Room temperature values by grade and temper
Grade / ConditionSpecificationTensile Strength (MPa)Yield Strength 0.2% (MPa)Elongation (%)
304 / 316 — AnnealedASTM A580515 min205 min30 min
304L / 316L — AnnealedASTM A580485 min170 min30 min
302 Spring Temper — 0.5 mmASTM A313 (typical)~2240 – 2450——
302 Spring Temper — 3.0 mmASTM A313 (typical)~1690 – 1860——

Spring wire tensile strength decreases as diameter increases; values shown are typical spring-temper ranges. Half-hard and bright-drawn wire is supplied to the tensile range agreed on the order.

Dimension Chart

Standard Wire Gauge (SWG) with stainless steel wire weight
SWGDiameter (mm)Diameter (inch)SS Wire Weight (kg/km)
84.0640.160102.9
103.2510.12865.82
122.6420.10443.47
142.0320.08025.72
161.6260.06416.47
181.2190.0489.25
200.9140.0365.20
220.7110.0283.15
240.5590.0221.95
260.4570.0181.30
280.3760.01480.88
300.3150.01240.62

Weight (kg/km) = 6.228 × d², where d is the diameter in mm (based on a stainless steel density of about 7.93 g/cm³). See Technical Data for more weight formulas.

Applications

Industries that rely on our wire products

Springs & Precision Parts

Fastener Manufacturing

Welding & Fabrication

Wire Mesh & Filters

Electrical & Cables

Automotive

Chemical Processing

Medical Devices

Food Processing

Marine & Offshore

Looking for a specific wire size or temper?

Share the grade, diameter, temper and coil format — we will confirm availability and price.

Get a Quote