Welcome to Rajdeep Metals
Maulana Azad Road, Mumbai-400004
Product 04 / 08

Pipe Fittings

Butt-weld and forged socket-weld / threaded fittings in Stainless Steel, Duplex, Nickel Alloys, Carbon Steel and Alloy Steel — elbows, tees, reducers, caps, stub ends and branch outlets.

Butt-Weld & Forged Stainless steel butt-weld and forged pipe fittings stocked by Rajdeep Metals
Product Overview

Fittings That Match Your Pipe, Grade for Grade

Rajdeep Metals supplies butt-weld fittings to ASME B16.9 and forged socket-weld and threaded fittings to ASME B16.11 for process piping, utility lines and pressure systems. Every fitting is marked with its grade, size, schedule and heat number for full traceability.

We match fitting material, wall schedule and end preparation to your pipe specification, so welding procedures and pressure ratings line up across the entire piping run.

  • Butt-weld 1/2" NB to 48" NB
  • Forged 1/8" NB to 4" NB
  • SCH 5S to XXS
  • Class 2000 / 3000 / 6000 / 9000
  • EN 10204 3.1 / 3.2 MTC
  • Seamless & welded construction

Types of Pipe Fittings

Butt-weld, forged socket-weld / threaded and branch-outlet fittings

Butt-Weld Fittings (ASME B16.9)

45° LR / SR Elbows – 3D drawing
45° LR / SR Elbows
90° LR / SR Elbows – 3D drawing
90° LR / SR Elbows
180° Returns – 3D drawing
180° Returns
Equal Tees – 3D drawing
Equal Tees
Reducing Tees – 3D drawing
Reducing Tees
Concentric Reducers – 3D drawing
Concentric Reducers
Eccentric Reducers – 3D drawing
Eccentric Reducers
Pipe Caps – 3D drawing
Pipe Caps
Stub Ends – 3D drawing
Stub Ends
Crosses – 3D drawing
Crosses
Long Radius Bends – 3D drawing
Long Radius Bends

Forged Fittings (ASME B16.11) & Branch Outlets (MSS SP-97)

SW / Threaded Elbows – 3D drawing
SW / Threaded Elbows
SW / Threaded Tees – 3D drawing
SW / Threaded Tees
Full Couplings – 3D drawing
Full Couplings
Half Couplings – 3D drawing
Half Couplings
Unions – 3D drawing
Unions
Bushings – 3D drawing
Bushings
Plugs – 3D drawing
Plugs
Swage Nipples – 3D drawing
Swage Nipples
Weldolets – 3D drawing
Weldolets
Sockolets – 3D drawing
Sockolets
Threadolets – 3D drawing
Threadolets

Specifications

Standards, size range and supply conditions
Dimension StandardsASME B16.9 (butt-weld), ASME B16.11 (forged SW / threaded), ASME B16.28, MSS SP-43, MSS SP-79, MSS SP-83, MSS SP-95, MSS SP-97
Stainless SteelASTM A403 WP304 / 304L / 316 / 316L / 321 / 347; ASTM A182 (forged)
Duplex & Super DuplexASTM A815 WPS31803 / WPS32205 / WPS32750
Nickel AlloysASTM B366 WPNC (Monel 400), WPNCI (Inconel 600), WPHC276 (Hastelloy C276) and others
Carbon SteelASTM A234 WPB / WPC, A420 WPL6 (low temperature), A105 (forged)
Alloy SteelASTM A234 WP11 / WP22 / WP91; ASTM A182 F11 / F22 / F91 (forged)
Butt-Weld Size1/2" NB to 48" NB (seamless up to 24", welded above)
Forged Size1/8" NB to 4" NB
Wall ThicknessSCH 5S, 10S, 40S, STD, 40, 80S, XS, 80, 160, XXS
Pressure ClassSocket Weld: 3000, 6000, 9000  |  Threaded: 2000, 3000, 6000
EndsBevelled (ASME B16.25), Socket Weld, Threaded (NPT ASME B1.20.1 / BSP)
TestingPMI, Radiography (welded fittings), Dye Penetrant, IGC, Hardness, Dimensional Inspection

Grades Available

Common grades held in stock or sourced at short notice

Stainless Steel

WP304WP304LWP304H WP316WP316LWP321 WP347WP310SWP317L 904L

Duplex & Super Duplex

WPS31803WPS32205 WPS32750WPS32760

Nickel Alloys

WPN (Nickel 200)WPNC (Monel 400) WPNCI (Inconel 600)WPNCMC (Inconel 625) WPNICMC (Incoloy 825)WPHC276

Carbon & Alloy Steel

WPBWPC WPL6A105 WP11WP22WP91

Chemical Composition

Weight % — maximum unless a range is shown (ASTM A403 / A234 / A420)
GradeCMnSiPSCrNiMoOther
WP3040.082.001.000.0450.03018.0 – 20.08.0 – 11.0——
WP304L0.0302.001.000.0450.03018.0 – 20.08.0 – 12.0——
WP3160.082.001.000.0450.03016.0 – 18.010.0 – 14.02.00 – 3.00—
WP316L0.0302.001.000.0450.03016.0 – 18.010.0 – 14.02.00 – 3.00—
WP3210.082.001.000.0450.03017.0 – 19.09.0 – 12.0—Ti 5×(C+N) – 0.70
WPB0.300.29 – 1.060.10 min0.0500.0580.400.400.15Cu 0.40, V 0.08
WPL60.300.60 – 1.350.15 – 0.400.0350.0400.300.400.12Cu 0.40, Nb 0.02, V 0.08

Chemical composition for duplex, nickel alloy and alloy steel fittings is listed on the respective material pages.

Mechanical Properties

Minimum values at room temperature
GradeTensile Strength (MPa)Yield Strength 0.2% (MPa)Elongation (%)Hardness (max)
WP304 / WP31651520528—
WP304L / WP316L48517028—
WPB415 – 58524022197 HB
WPL6415 – 58524022—

Elongation values are for standard longitudinal specimens. Impact testing of WPL6 is carried out at −46 °C (−50 °F) as required by ASTM A420.

Dimension Chart

Butt-weld fitting dimensions in mm as per ASME B16.9
NPS (inch)OD (mm)90° LR Elbow (A)45° LR Elbow (B)Tee Centre-to-End (C)Cap Length (E)
1/2"21.338162525
3/4"26.738192925
1"33.438223838
1 1/4"42.248254838
1 1/2"48.357295738
2"60.376356438
2 1/2"73.095447638
3"88.9114518651
4"114.31526410564
6"168.32299514389
8"219.1305127178102
10"273.0381159216127
12"323.8457190254152

A, B and C are centre-to-end dimensions; E is the cap length for standard wall thickness. Larger sizes, short-radius elbows and reducer dimensions are available on request. See Technical Data for more.

Applications

Industries that rely on our pipe fittings

Oil & Gas Refineries

Petrochemical Plants

Chemical Processing

Power & Steam Lines

Gas Distribution

Pharmaceuticals

Food & Dairy

Fertilizer Plants

Water Treatment

Marine & Offshore

Have a fittings list to price?

Send your bill of materials — we will confirm availability, lead time and price for every line item.

Get a Quote