Not every requirement fits a catalogue. Rajdeep Metals manufactures products exactly as per customer drawings, with the customer's nominated trademark and marking requirements — from a single machined spacer to a batch of special flanges, blinds, spool pieces or forged components.
We start from your drawing, datasheet or sample, confirm material, dimensions, tolerances and inspection points with you, and deliver parts with the documentation your project needs — so they drop straight into your assembly or plant.
| Basis of Manufacture | Customer drawings, datasheets, approved samples and purchase specifications |
|---|---|
| Pressure Parts | ASME Boiler & Pressure Vessel Code Section VIII Division 1 |
| Welding Qualification | ASME Section IX — Welding Procedure Specification (WPS / PQR) and Welder Performance Qualification (WPQ) |
| Structural Welding | AWS D1.1 (Structural Steel), AWS D1.6 (Stainless Steel) |
| Process Piping | ASME B31.3 Process Piping |
| Material Standards | ASTM / ASME, EN, DIN and IS material specifications as called out on the drawing |
| Marking | Customer's nominated trademark, heat number, grade, size, tag / item number — by hard stamping, low-stress stamping, stencilling or etching |
| Inspection | As per agreed Quality Assurance Plan (QAP); customer or third-party inspection at stage and final points |
| Material Certificates | EN 10204 Type 3.1 / 3.2 Mill Test Certificates |
| Reports | Dimensional inspection reports; NDT reports — Dye Penetrant (DP), Radiography (RT), Ultrasonic (UT) — when specified; PMI on request |
| Surface Finish | As machined, pickled & passivated, polished, painted or coated — as per drawing |
| Packing | Seaworthy wooden boxes / pallets, individual wrapping, VCI protection, customer-specified labelling |
Austenitic and duplex grades for hygienic, corrosive and outdoor service.
ExploreInconel, Monel and Hastelloy parts for acids, seawater and high heat.
ExplorePlates, forgings and structural parts for vessels, skids and supports.
ExploreCr-Mo and quenched & tempered steels for high-temperature, high-strength parts.
ExploreCopper, brass and cupro-nickel components for electrical and marine use.
Explore| Grade | C | Mn | Si | P | S | Cr | Ni | Mo | Other |
|---|---|---|---|---|---|---|---|---|---|
| 304L | 0.030 | 2.00 | 0.75 | 0.045 | 0.030 | 17.5 – 19.5 | 8.0 – 12.0 | — | N 0.10 |
| 316L | 0.030 | 2.00 | 0.75 | 0.045 | 0.030 | 16.0 – 18.0 | 10.0 – 14.0 | 2.00 – 3.00 | N 0.10 |
| 2205 (S32205) | 0.030 | 2.00 | 1.00 | 0.030 | 0.020 | 22.0 – 23.0 | 4.5 – 6.5 | 3.0 – 3.5 | N 0.14 – 0.20 |
| Inconel 625 | 0.10 | 0.50 | 0.50 | 0.015 | 0.015 | 20.0 – 23.0 | 58.0 min | 8.0 – 10.0 | Nb+Ta 3.15 – 4.15, Fe 5.0 |
| Monel 400 | 0.30 | 2.00 | 0.50 | — | 0.024 | — | 63.0 min | — | Cu 28.0 – 34.0, Fe 2.50 |
| A516 Gr. 70 | 0.27 – 0.31* | 0.85 – 1.20 | 0.15 – 0.40 | 0.025 | 0.025 | — | — | — | — |
* A516 Gr. 70 maximum carbon rises from 0.27% to 0.31% with increasing plate thickness. Stainless steel values per ASTM A240; nickel alloys per ASTM B443 / B127.
| Grade | Product Standard | Tensile Strength (MPa) | Yield Strength 0.2% (MPa) | Elongation (%) |
|---|---|---|---|---|
| 304L | ASTM A240 | 485 | 170 | 40 |
| 316L | ASTM A240 | 485 | 170 | 40 |
| 2205 (S32205) | ASTM A240 | 655 | 450 | 25 |
| Inconel 625 | ASTM B443 Gr. 1 (annealed plate) | 827 | 414 | 30 |
| Monel 400 | ASTM B127 (annealed) | 480 | 195 | 35 |
| A516 Gr. 70 | ASTM A516 | 485 – 620 | 260 | 21* |
* Elongation in 50 mm gauge length. Properties of the finished part depend on the starting product form and any heat treatment specified on the drawing.
| Nominal Size Range (mm) | Fine (f) | Medium (m) | Coarse (c) |
|---|---|---|---|
| 0.5 – 3 | ±0.05 | ±0.1 | ±0.2 |
| over 3 – 6 | ±0.05 | ±0.1 | ±0.3 |
| over 6 – 30 | ±0.1 | ±0.2 | ±0.5 |
| over 30 – 120 | ±0.15 | ±0.3 | ±0.8 |
| over 120 – 400 | ±0.2 | ±0.5 | ±1.2 |
| over 400 – 1000 | ±0.3 | ±0.8 | ±2.0 |
| over 1000 – 2000 | ±0.5 | ±1.2 | ±3.0 |
| over 2000 – 4000 | — | ±2.0 | ±4.0 |
ISO 2768 general tolerances apply only where the drawing does not specify otherwise. Actual tolerances always follow the customer drawing — individually toleranced dimensions, GD&T callouts and fit classes take precedence.
Email your drawing, material and quantity — we will review it and come back with a quotation.