Carbon steel is iron alloyed mainly with carbon and manganese. It offers high strength, good weldability and excellent toughness at a fraction of the cost of stainless or nickel alloys, making it the default choice for non-corrosive and mildly corrosive services across process plants, pipelines and structures.
Rajdeep Metals supplies carbon steel for high-temperature service (A106), general piping (A53), low-temperature service (A333 Gr. 6), pressure vessels (A516 Gr. 70) and structural work (A36), with matching A105 flanges and A234 WPB fittings for complete line packages.
| Seamless & Welded Pipe | ASTM A106 / ASME SA106 Gr. B / C, A53 Gr. B, API 5L Gr. B / X42 – X70 (PSL1 / PSL2) |
|---|---|
| Low-Temperature Pipe | ASTM A333 / ASME SA333 Gr. 6 |
| Boiler & Heat Exchanger Tubes | ASTM A179, A192, A210 Gr. A1 / C, A334 Gr. 6 |
| Plates | ASTM A516 / ASME SA516 Gr. 60 / 70, A36, A285 Gr. C, IS 2062 |
| Rods & Bars | ASTM A105 (forging bar), A36, SAE 1018 / 1020 |
| Buttweld Fittings | ASTM A234 / ASME SA234 WPB, A420 WPL6 — ASME B16.9, B16.28, MSS SP-75 |
| Forged Fittings & Flanges | ASTM A105 / ASME SA105, A350 LF2, A694 F42 – F65 — ASME B16.5, B16.11, B16.47 |
| Fasteners | ASTM A307, A193 B7, A194 2H |
| Dimension Standards | ASME B36.10M, API 5L, EN 10216-1 / -2, EN 10217 |
| Grade | C | Mn | P | S | Si | Other |
|---|---|---|---|---|---|---|
| A106 Gr. B | 0.30 | 0.29 – 1.06 | 0.035 | 0.035 | 0.10 min | — |
| A106 Gr. C | 0.35 | 0.29 – 1.06 | 0.035 | 0.035 | 0.10 min | — |
| A53 Gr. B | 0.30 | 1.20 | 0.05 | 0.045 | — | — |
| A333 Gr. 6 | 0.30 | 0.29 – 1.06 | 0.025 | 0.025 | 0.10 min | — |
| A105 | 0.35 | 0.60 – 1.05 | 0.035 | 0.040 | 0.10 – 0.35 | — |
| A234 WPB | 0.30 | 0.29 – 1.06 | 0.050 | 0.058 | 0.10 min | — |
| A516 Gr. 70 | 0.27 – 0.31* | 0.85 – 1.20 | 0.025 | 0.025 | 0.15 – 0.40 | — |
| A36 (plate) | 0.25 – 0.29* | 0.80 – 1.20* | 0.04 | 0.05 | 0.40 | Cu 0.20 min (when specified) |
* Maximum carbon (and, for A36, manganese requirement) depends on plate thickness — the lower value applies to thinner sections.
| Grade | Tensile Strength (MPa) | Yield Strength (MPa) | Typical Use |
|---|---|---|---|
| A106 Gr. B | 415 | 240 | High-temperature process pipe |
| A106 Gr. C | 485 | 275 | Higher-strength process pipe |
| A53 Gr. B | 415 | 240 | General & utility piping |
| A333 Gr. 6 | 415 | 240 | Low-temperature pipe (impact tested) |
| A105 | 485 | 250 | Flanges & forged fittings |
| A234 WPB | 415 – 585 | 240 | Buttweld fittings |
| A516 Gr. 70 | 485 – 620 | 260 | Pressure vessels & boilers |
| A36 | 400 – 550 | 250 | Structural plate & sections |
Elongation requirements vary with wall thickness and specimen type — refer to the governing specification.
| Grade | UNS | EN (nearest equivalent) | Notes |
|---|---|---|---|
| A106 Gr. B | K03006 | ~ P235GH / P265GH | Nearest equivalent — EN 10216-2 |
| A333 Gr. 6 | K03006 | ~ P265NL | Nearest equivalent — EN 10216-4 |
| A516 Gr. 70 | K02700 | ~ P355GH | Nearest equivalent — EN 10028-2 |
| A105 | K03504 | ~ P250GH | Nearest equivalent — EN 10222-2 |
| A36 | K02600 | ~ S275JR | Nearest equivalent — EN 10025-2 |
These are nearest equivalents only. Chemistry, strength and impact requirements differ between ASTM and EN standards, so substitution should be approved by the design engineer.
Share your size list and grade — we will confirm availability, lead time and price.